Convenience and function of curb slipform machine construction, Why use curb slipform machine construction?
The curb stone is the boundary stone set on the edge of the road surface, also known as the edge stone. It is used as a boundary stone set on the edge of the road surface and other structural zones, and plays a very important role in the construction and division of roads. The curb stones are set on the middle divider, the dividers on both sides and both sides of the roadside. The curbs can be divided into vertical edge stones and flat edge stones.
The installation of prefabricated curb stones in highway construction is mainly done manually. Existing curb stone construction technological process measurement setting-out-excavation of base groove-hanging wire seat slurry all the way curb installation and leveling-pointing-health preservation. There are many procedures, cumbersome, low production efficiency, and difficult to guarantee the installation quality. So how can we make the curb paving work simple, efficient, consistent in quality and high in stability? Using a special curb slipform machine is the most direct and reliable way.
Curb and Gutter Machine
The earliest curb slipform machine was born in the United States in the 1880s. It is a reverse push extrusion slipform machine. Its appearance replaced the prefabricated construction method at that time, and it was widely used in the continuous slipform construction of curbstones on site. Due to the limited power provided by the manually operated extruding pistons of this equipment, only small concrete structures can be built using dry hard concrete. With the continuous expansion of highway construction scale, curb stone slipform machine (curb stone slipform machine) has also been continuously improved and developed, and its use is becoming more and more common.
Working principle:
Contact us to get a free quote.
WhatsApp/WeChat: +8613598866720
Email:admin@ygroadmachine.com
Why use a curb slipform machine for construction?
It is not difficult to answer this question, because in most cases, a kind of machinery appears to solve the heavy workload, slow speed, high cost and poor consistency of manual production projects. of. The same is the reason why the curb slipform machine appeared.
In order to solve the problem of high labor intensity and easy damage of curbstone construction; YG Machinery has produced and developed a new type of curbstone slipform machine. Stone Slipform machine adopts a fully automatic operation method, which can continuously cast the freshly mixed curb material on the construction site and compact it; and it is easy to carry, and the pass rate of the product is above 98%, which reduces the labor intensity of labor.
According to the road conditions and engineering requirements, the curb slipform machine can not only realize the front and rear height balance during the operation of the whole machine, but also realize the height balance of the left and right positions of the whole machine, which can improve the construction quality. In addition, the laid curb stones are smooth and beautiful, closely combined with the roadbed, linear and straight, and compared with the prior art, the utility model has the practicability of complete functions and convenient operation.
Contact us to get a free quote.
WhatsApp/WeChat: +8613598866720
Email:admin@ygroadmachine.com
Curb stone slipform machine (roadside stone slipform machine) Features
After the water stabilization layer is paved, it can be paved directly, and the concrete can be mixed directly on site. The transportation pressure and cost are greatly reduced, and the physical strength consumed by the construction difficulty of the workers is also reduced. Greatly reduced; once formed, the curb slipform machine (curb slipform machine) can also be equipped with control direction and leveling system, so that the formed road shoulders and curbs have good linearity and simple procedures; the construction speed is fast, and it can reach 1500 per day rice.
Only 3-5 people are required to operate the curb slipform asphalt paver on site. After one-time molding, very few curbs need to be repaired manually. The curbstones that can be slipformed are about 1000-1500 meters per day. Eliminate the traditional curb prefabrication process to buy a large number of curb mold shells - find a large number of prefabricated curb stones on the site - transport the curb stone from the prefabricated site to the construction site - unload, install, and ditch on site. In the whole process, there will be bumps and damaged curbs, which will reduce work efficiency.
Contact us to get a free quote.
WhatsApp/WeChat: +8613598866720
Email:admin@ygroadmachine.com
Comments
Post a Comment