How to perform maintenance operations on fog cannon dust suppression?

 The three effects of fog cannon machine: dust reduction, moisturizing and cooling, spraying disease prevention, and so on. When purchasing dust suppression cannon, you must choose the right type of fog cannon machine according to your needs. The fog cannon machine, also known as fog cannon dust suppression, is a new type of spray dust suppression equipment. The dust suppression cannon uses the micron-sized particles produced by the spray to be sprayed into the air to absorb dust particles of various sizes in the air faster and more effectively. It can effectively reduce dust and increase air humidity at the same time, which has a significant effect on cooling the construction site. Fog cannon dust suppression is based on the principle of air delivery. It first uses advanced high-pressure pumps and fine atomizing nozzles to atomize the water, and then uses the air volume and pressure of the fan to send the atomized water mist to a longer distance, so that the water mist reaches a longer distance. It can cover a larger area at a long distance. These tiny artificial fog particles can float and suspend in the air for a long time. The length of the fog produced by a single nozzle can reach 3-5 meters, the width of the fog is 1-2 meters, and the water mist and dust are condensed. After landing, so as to achieve the purpose of dust reduction.

How is fog cannon dust suppression maintained?

1. Fog cannon machine wheel oil generally uses spindle oil and sewing machine oil. It is forbidden to use or recycle machine oil, otherwise, it will cause serious damage to the parts of the fog cannon machine.

2. Please use a mist cannons machine under the air pressure of 8-10kg/cm2. If the air pressure is too low, it will not be able to exert its ability. If the air pressure is too high, the service life of the tool will be greatly reduced.

3. In order to make the fog cannon dust suppression work normally, it is necessary to install an oiler, a filter, and a pressure regulating valve at the outlet of the air compressor.

4. If there is no refueling device, refueling to the fuel injection port designated by the dust suppression cannon before and after work can play a better function.

5. Regularly check whether there is sewage and impurities in the filter device, and remove the sewage in time to avoid affecting the use.

6. Check the air hoses and joints for leaks or looseness, to prevent the compressed air pressure from entering the dust suppression cannon from being insufficient.

7. Check whether the fog cannon dust suppression and pneumatic tool attachments are connected reliably to prevent tool damage or accidental injury in the event of a prosperous sudden failure.

8. Non-pneumatic tool accessories shall not be used on pneumatic tools.

9. If the tower crane sprays, the fog cannon machine does not rotate or rotates smoothly, add a large amount of spindle oil or sewing machine oil and rotate it. After cleaning the dirt and obstacles for two to three consecutive times, the fault has not been eliminated. This requires fog cannon The maintenance staff of the machine repaired it.