Concrete Mortar Spraying Machine Manufacturer—Factory Direct Sales

 The operation of the concrete mortar spraying machine is very simple. When plastering works manually, trolleys, elevators and other equipment are also needed, while the mortar spraying machine does not require scaffolding or any mobile equipment, and can freely spray on the yin and yang corners and the roof. Using concrete mortar spraying machine can not only shorten the construction period, but also save other costs. Cement sprayer machine products are mainly used for building interior and exterior walls, cement mortar spraying, exterior wall insulation material mortar spraying, and refractory spraying. One machine is multi-purpose, can spray mortar, waterproof coating, refractory materials, and is not affected by regional and environmental conditions and the shape of the spray surface.

Advantages of cement sprayer machine

1. The mortar sprayers have reasonable design, integrated pump and compressor, and convenient to move.

2. The cement plaster spray machine has continuous feeding and no pulse phenomenon. The mortar spraying machine has wide practicability.

3. Mortar sprayers spray evenly and have strong adhesion.

4. The cement sprayer machine has complete functions. It can spray and spray the spray gun and the nozzle can be connected in any direction, which is convenient for operation.

5. In addition to the switch on the electric control box, it is also equipped with a remote control switch for spraying.

6. The connection between the spray gun and the feeding pipe can be rotated for easy operation. The construction efficiency is high and the quality is good.

7. Small size, easy to carry on site, and low cost of accessories, simple maintenance.

8. Easy to use, fast, save materials, labor, and more money, one machine only has three people, 150 square meters per hour (thickness 50px).

Installation and inspection of cement mortar spraying machine

1. Installation

Install and connect the parts and auxiliary accessories of the prepared cement sprayer machine correctly.

2. Check

After the cement mortar spraying machine is installed and connected, it is ready to be sprayed. Before spraying, check whether the power source is operating normally, and then suck in the paint, check whether the high-pressure paint cylinder is pressurized properly, whether the conveying hose is leaking, and whether the connection between the accessories is tight. Whether the spray gun and filter are clogged, etc. Find faults and eliminate them in time.

3. Control of painting environmental conditions

Measure the temperature and humidity of the spraying environment, and meet the coating conditions, and the coating operation can be performed. An outdoor painting should also consider weather factors. During a period of time from spraying to drying of the coating surface, rain and weather with high wind speed and heavy sand should be avoided.