Sandblasting Machine—Automatic Sandblasting Equipment—Sandblasting machine price manufacturers

 Unlike other sand processing equipment, sandblasting machine is a kind of sand processing equipment that can use abrasives to spray on the surface of the workpiece with the help of compressed air power. According to the characteristics of the sand blaster machine, the sandblaster machine is suitable for cleaning the rough surface of forged castings, stamping parts, and machining parts, for spraying, pretreatment procedures before electroplating, and strengthening the surface of light decoration parts. The sandblasting machine is especially suitable for small and medium-sized Single parts are produced in small batches.

The characteristic of sandblasting equipment is that it is equipped with intake pressure and sandblasting pressure display, and is equipped with a pressure reducing valve, which can adjust the sandblasting pressure according to the needs. A filter is installed at the compressed air inlet to filter out the moisture in the compressed air.

The sandblasting equipment is equipped with an automatic separation and automatic dust removal system. The used sand is transported by negative pressure from the bottom of the machine to the cyclone separator for separation, and the dust, rust, oxide scale, and other impurities generated during the sandblasting process are removed from the good Separated from the sand. The characteristics of the sandblasting machine enable the sandblasting machine to continue to use the sand stored in the hopper at the bottom of the separator and be recycled. Large oxide scales and other impurities are blocked by the mesh at the bottom of the separator, and the dust part is transported to the sandblasting The machine is processed in the dust box, the dust is collected and the clean air is discharged into the atmosphere.

Precautions for use of portable sandblasting machine

1. You must wear protective equipment before work, and work with bare arms is not allowed. There must be no less than two people at work.

2. Check whether the ventilation pipe and sand blaster machine door are sealed. Five minutes before work, the ventilation and dust removal equipment must be activated. When the ventilation and dust removal equipment fails, the sandblasting machine is prohibited from working.

3. The compressed air valve should be opened slowly, and the air pressure must not exceed 0.8MPa.

4. The blasting particle size should be compatible with the work requirements, generally between 10 and 20, and the sand should be kept dry.

5. When the automatic sandblaster is working, no unrelated persons are allowed to approach. When cleaning and adjusting the operating parts, the machine should be stopped. 　

6. It is not allowed to use compressed air to blow dust on the body or make jokes.

7. After the work is finished, the ventilation and dust removal equipment should continue to operate for five minutes and then shut down to discharge indoor dust and keep the site clean.

8. In the event of a personal or equipment accident, the scene should be maintained and reported to the relevant department.