Crack Sealing Machine Manufacturer- Quality Assurance

 Irregular cracks on highways are very common, but if they are not maintained in time, they will cause extensive damage to the road surface. Severe collapse is easy to form, and it is easy to cause unnecessary harm when there is too much rain. Municipal highway asphalt crack sealing machine is mainly used for asphalt or cement pavement cracks and asphalt grouting. Mainly restore the road to the state before the damage, so that the road surface can extend its service life and obtain a greater utilization rate.

Features of crack filling machine:

1. The heat conduction oil of the municipal highway repairing road cracks indirectly heats the material, circulating heat preservation, and the imported diesel burner is the heating source. The material is heated evenly, and the intelligent sensor automatically detects the temperature, so that the material is not carbonized, invariable, and the melting time is short, economical and safe , Environmental protection;

2. The discharge hose is electrically heated throughout the entire process, free of cleaning, and sufficient bending, to meet multiple construction requirements for horizontal and vertical cracks to ensure a large construction area;

3. Full electronic control, heating temperature, discharge pipe heating, burner operation, asphalt pump operation, fuel status, fault alarm, etc. are all timely displayed, realizing the integration of electronic automatic control;

4. Brand generators can provide stability, work stability and reliability for the whole machine;

5. The humanized handle design of the grouting gun is equipped with an electric switch on the handle of the grouting gun, which can remotely control the asphalt pump, avoiding waste, sanitation and cleaning;

6. Asphalt pump, the conveying pressure is high, the material is embedded in deep cracks, the construction quality is guaranteed, the material flow is steplessly adjusted, and it is suitable for crack repair operations of various widths and shapes.

Instructions for the use of asphalt crack filler machine:

1. Open the liquefied gas valve, and use an electronic igniter to ignite the liquefied gas furnace under the front of the fuselage (the front is equipped with an observation hole). Start heating, adjust the flame in the furnace, and adjust the opening size of the pressure reducing valve to suit the combustion. (Opening too much may cause poor combustion or extinguishment, and opening too small may cause red flames and poor combustion.)

2. Put clean caulking material into the melting furnace (about 20Kg at a time, or add the required amount as needed), and cover the furnace lid. For normal use, the appropriate amount of materials should be added at the right time according to use. Continuous use means that a certain finished material is kept in the furnace, which can increase the heat utilization rate and greatly improve the melting efficiency.

3. Pay attention to the temperature rise of the thermometer, the temperature displayed by the thermometer cannot exceed the allowable temperature of the caulking material. Exceeding the allowable temperature will cause the caulking material to harden.

4. Start the generator with mixed oil, and supply power to the control system and insulation system according to the generator's operating instructions.

All in all, the operation of the equipment should be carried out under the guidance of professionals to prevent unnecessary troubles. To learn more about thecrack asphalt sealing machine price, or the crack sealing machine manufacturer, you can add my WhatsApp+86135988866720. I will Answer more relevant information about the asphalt sealing equipment for you.