How are the markings on the road marked?

 Traffic markings on highways play a vital role in orderly appearance. How are these markings made? This requires good equipment, that is, a highway road marking machine. There are many types of highway road marking equipment. It is inevitable to be entangled when choosing. Which one is better?

Road traffic markings are mainly set on the road surface, subject to sun, rain, wind, snow, and freezing, and impact and abrasion from vehicles, so there are strict requirements for its performance. First, it requires a short drying time and simple operation to reduce traffic interference; secondly, it requires strong reflection, bright colors, and strong reflectivity, so that it has good visibility during the day and night; it should have skid resistance and wear resistance to ensure driving safety and longevity.

The advantages of thermoplastic road marking machine are as follows:

1. Material barrel: Double-layer stainless steel heat preservation and heating barrel, capacity 100kg, plug-in manual stirring device, detachable device.

2. Glass beads and microbead spreader: synchronous clutch spreading, equipped with speed-regulating gear shifting device.

3. Scribing bucket: made of high-precision ultra-thin material, scraper structure, standard configuration 150mm.

4. Floor knife: hard alloy, equipped with an eccentric sleeve device, which can adjust the thickness of the marking line: 1-2.5mm.

5. Rubber wheels: aluminum alloy wheels, heat-resistant rubber characteristics, make the car body move in a straight line.

The operation method of thermoplastic road marking machine

1. Make all preparations before construction, and check whether the bolts at each connection part are loose, whether the liquefied gas pipeline of the heating system is well connected, and whether the switches are in the correct position.

2. Open the liquefied gas tank, ignite the gas, preheat the mixing bucket marking bucket, clean the marking bucket, and at the same time add lubricating oil to lubricate all parts, and then put the heated paint into the marking machine mixing bucket in.

3. The paint in the mixing tank needs to be stirred frequently to avoid precipitation or burning.

4. Align the pointer of the marking machine with the placed reference line, position the rear wheel, lift the hopper lever, lower the hopper, press down the lever, and open the glass bead spreader (that is, open the hand push handle of the marking machine Side handle), you can do cart work.

5. After the operation is completed, lift the hopper control lever, close the marking hopper, place the hopper on the hopper support frame, and close the glass bead spreader at the same time. It can be operated continuously after feeding.