YG Machinery

  Core drilling rigs are deep-hole drilling equipment for geological prospecting, hydrological water wells, coal field geological exploration, oil and natural gas exploration and development and other fields. This drilling rig combines the advantages of a vertical shaft hydraulic drilling rig , which can be used for small-diameter diamond drilling, large-diameter drilling, vertical drilling, and diagonal drilling. It is an ideal equipment for deep-hole geological exploration drilling. Main features of diamond core drilling machine 1. The vertical shaft speed is high and the speed range is wide. 2. The elevator is equipped with a water brake, and the lowering of the drilling tool is stable and safe. 3. Oil-soaked clutch, stable starting, with brake device. 4. The hydraulic operating system has reserved special valve ports, which can be used when equipped with a pipe screwing machine. 5. The drilling rig moves forward and backward in a large distance, which is convenient for hole ope...

  Traffic markings on highways play a vital role in orderly appearance. How are these markings made? This requires good equipment, that is, a highway road marking machine . There are many types of highway road marking  equipment . It is inevitable to be entangled when choosing. Which one is better? Road traffic markings are mainly set on the road surface, subject to sun, rain, wind, snow, and freezing, and impact and abrasion from vehicles, so there are strict requirements for its performance. First, it requires a short drying time and simple operation to reduce traffic interference; secondly, it requires strong reflection, bright colors, and strong reflectivity, so that it has good visibility during the day and night; it should have skid resistance and wear resistance to ensure driving safety and longevity. The advantages of thermoplastic road marking machine are as follows: 1. Material barrel: Double-layer stainless steel heat preservation and heating barrel, capacity 100kg...

Trolley Disinfection Tunnel

 With the continuous development of industry, the requirements for using equipment are getting higher and higher. Coupled with the increasingly serious environmental pollution, haze and sandy weather are often accompanied, and people's health is seriously threatened. This kind of weather is mostly caused by improper handling of industrial waste. The appearance of fog cannons machine greatly restricts the haze and dust. It plays an important role in promoting safe production, protecting the health of employees, and maintaining environmental sanitation. Fog cannon machine has now become a practical tool for reducing haze. The atomization principle of the mist cannon: The atomization principle of the mist cannon is to use the high-speed airflow generated by the high-pressure centrifugal fan to forcefully impact the liquid medicine and break it into small droplets. At the same time, it is further atomized the high-speed surging airflow, and then the airflow from the air outlet The ...

The shot blasting equipment automatically completes the target cleaning task, which not only reduces the labor intensity of manual cleaning, but also improves the cleaning effect and greatly improves work efficiency. At the same time, since the mechanical equipment is made of steel, the design is reasonable. Even if the equipment is in working condition for a long time, the equipment will not have serious failure and has a long service life. It is an indispensable cleaning equipment for the steel foundry industry. Selection of shot blasting equipment model: First choose the working mode of the shot blasting machine : drum shot blasting machine, crawler shot blasting machine, hook shot blasting machine (also divided into single hook shot blasting machine, double hook shot blasting machine), trolley type shot blasting machine Machine, through type shot blasting machine, hanging type through shot blasting machine. After the working mode of the shot blasting machine is selected, it can b...

  The small asphalt milling machine is a light ground construction machine. It is produced to make up for the shortcomings of the large asphalt milling machine . It is mainly used for roughening, leveling, and removing surface coverings on cement and asphalt surfaces. An excellent machine with high efficiency and low damage. Product features of asphalt milling machine for sale : 1. The down-cutting milling mode and the design of adjustable milling depth ensure good milling quality. 2. The milling blade adopts the cutter shaft installation type, which is convenient to exchange. 3. The adjustable handle is convenient for operation and improves the operator's work comfort. 4. There is a vacuum cleaner interface to provide a dust-free working environment; 5. High work efficiency, stable and reliable operation; 6. The milling depth can be adjusted and the depth is up to; 7. It is especially suitable for large-scale ground processing, with fast speed and high efficiency. The use of a sm...

  Water well drilling machine are necessary machinery for our drilling projects. For the drilling rig industry, there are many categories, regardless of which they belong to. For household water wells and water wells, they are nothing more than small water well drilling rigs . Because of their lightness and convenience It can be moved and can be drilled into rock, pebbles, granite and other hard layers. It is loved by the majority of friends. . Although it is a small water well drilling rigs, its efficiency is also very high. When everyone uses a water well drilling machine , one point of concern is to want its construction efficiency to be high, so what factors can affect the construction efficiency of the water well drilling equipment? 1. In purchasing drilling rigs, choose a brand with reliable quality, stable performance, good reputation and convenient service. Quality water well drilling rigs are an important factor for the drilling rig construction team. With a drilling rig,...

 In the operation of the wet wipe machine , some things must be paid special attention to. This is very important to everyone. Many people are completely unaware of some specific things in the process of operating the equipment, so it will directly affect the final As a result, what are the issues that all of us need to pay attention to during the operation? Learn the correct operation method: As a professional operator, you must learn the correct operation method carefully. Only when we all can understand, what is the specific operation method? It can be guaranteed in the subsequent use process. Once many people don’t understand the operation method, they will be greatly affected during the entire application process. Therefore, you should understand the specific operation at normal times the way. Is there an exception: Usually, when using the wet wipe making machine , we also need to observe carefully to see if there is any abnormality in the equipment, and the work efficienc...

 The most important thing for epidemic prevention and elimination is thorough disinfection. However, the disinfectant droplets sprayed by conventional disinfection equipment have large particles and poor adsorption, and the sprayed site is as wet as it has just been exposed to rain. In addition, in many cases, the corner gaps and the back of the object cannot be sprayed, making these blind areas a hidden danger. The diameter of the mist droplets formed by the electrostatic backpack sprayer is only 40 microns, which is smaller than half of the diameter of the hair. Due to the electrostatic adsorption ability, when disinfecting one side of the object, the disinfectant droplets floating on the side and back of the object will also be affected by it. The electrostatic force produces an adsorption phenomenon, which achieves 360-degree enveloping disinfection with one spray side and multiple sides, and the disinfection is completed more thoroughly. The droplets carry static electricity...

 The packaging is a necessary condition for products to enter the cycle, and the main means to achieve packaging is to use packaging machinery. With the development of the times and the advancement of technology, packaging machinery is becoming more and more important in the packaging field. With the continuous progress of the economic era, people's quality of life is also continuously improved, and enterprises are also facing various risks and challenges. Therefore, continuous progress and innovation must be adopted in all aspects of work, especially in product packaging is also very important. So how to choose a wet wipe packaging machine? The selection of the wet wipe packaging machine can be based on the permitted production, packaging speed, packaging weight, packaging size, and determined packaging. The length of the product and the analysis of its ingredients determine how many packages per minute can be achieved at the highest packaging design speed. The machine rolls and...

 Because meltblown nonwoven  is an important material for the production of medical surgical masks and N95 masks, and it is the "heart" of masks . Taking a medical-surgical mask as an example, it is composed of a masked face and a tightening belt, and the mask face is divided into three layers: inner, middle, and outer. T he inner layer is made of skin-friendly material: ordinary sanitary gauze or non-woven fabric; the middle layer is an isolation filter layer: ultra-fine polypropylene fiber meltblown material layer; the outer layer is a special material antibacterial layer: non-woven fabric or ultra-thin polypropylene melt Spray material layer. Medical masks generally adopt a multi-layer structure, referred to as SMS structure: a single spunbond layer (S) on both sides, and a single or multiple meltblown layers (M) in the middle. The best material for the meltblown layer is melt Spray cloth. The main material that brings the virus filtering effect to the mask is the middle ...

 Air purifiers are also known as "air cleaners" and air fresheners, which can absorb, decompose or transform various air pollutants (generally including dust, pollen, peculiar smell, formaldehyde, and other decoration pollution), such as plaster lamps in Laozhuang It is a natural source of negative ions that can volatilize negative ions called "air vitamins" and improve indoor air quality. An air disinfection machine is a machine that sterilizes and sterilizes the air. In addition to killing bacteria, viruses, molds, spores, and other so-called sterilization, some models can also remove formaldehyde, phenol, and other organic pollutants in the indoor air, and can also kill or filter pollen and other allergens. At the same time, it can effectively remove the smoke and smoke generated by smoking, the bad smell of the bathroom, and the human body odor. Can the air disinfection machine achieve all-round air purification? Most air purification equipment on the marke...

 First of all, you must know the raw materials and size of your workpieces, the number of workpieces you need to process each day, and the effect of sandblasting. Then, through consultation with the sandblasting machine manufacturer, decide what kind of sandblasting machine to buy. Just look at the price, it depends on the quality of the sandblasting machine and whether the sandblasting machine is suitable for your product. It is a waste to buy your own products if they are not suitable. How to choose a suitable sandblasting machine? 1. Find a regular automatic sandblasting machine manufacturer . At present, there are many unqualified sandblasting products on the market. If you buy it back, there may be a lot of problems. The after-sales can't keep up, causing a lot of losses. So be sure to choose the now regular factory. 2. Submit to the automatic sandblasting machine manufacturer the raw materials, size, amount of workpieces to be processed every day, and the effect of...

Nitrile gloves are mainly made by dipping nitrile latex, molding, vulcanizing, surface treatment, dust-free cleaning, and other processes. The specific production process is as follows: First of all, the material for making nitrile gloves is nitrile rubber, which is formed by the emulsion polymerization of butadiene and acrylonitrile. Then, the hand-washing mold: the hand-washing mold needs to be pickled first, washed first, alkali washed, and then washed. After washing the hand mold, it should be dried or dried before entering the next process. The third step is to impregnate the nitrile latex to shape the glove. That is, the hand mold is immersed in a container filled with nitrile, heated at a high temperature, and dried after forming the glove. Next, we need to prepare the gloves to curl to facilitate putting on and taking off the gloves. After the above steps, the nitrile glove has been formed, but it has not been successful. A key step is needed: chlorine washing. Chlorine cleani...

 The pile breaker uses a power source to provide pressure to multiple cylinders of the pile breaker, and the cylinders directly drive the drill rods while squeezing the pile body to cut off the pile head. During the construction of the pile breaker machine, the operation is simple, high efficiency, low noise, low cost, and is suitable for pile group construction projects. The pile breaker adopts a highly modular combination, and the modules are connected by pin shafts, and the pile heads within a certain range of diameter can be cut by combining different module numbers. The hydraulic pile breaker is composed of modules, which can be installed and disassembled according to the diameter of the broken pile head. Installed at the front end of an excavator or crane, using the power of an excavator or hydraulic station to break piles, mainly to destroy solid cast-in-place piles and solid precast piles. According to site requirements, pipe piles may be destroyed. Hydraulic pile breaki...

  Road cleaning: clean the ground before construction to remove dust, laitance, and moisture. Make all preparations before construction and check whether the bolts at each connection part are loose, whether the liquefied gas pipeline of the heating system is well connected, and whether the switches are placed in the correct position. Open the liquefied gas tank, ignite the gas, preheat the mixing bucket marking bucket, clean the marking bucket, and at the same time add lubricating oil to lubricate all parts, and then put the heated paint into the marking machine mixing bucket Medium. The paint in the mixing tank needs to be stirred frequently to avoid precipitation or burning. Stakeout: Since the hot melt marking paint is basically formed at one time, the route and pattern need to be marked before construction. Coating hot melt: the conventional construction equipment includes a blower, hot melt kettle, and hand-pushed line marking machine, the paint needs to be put into the h...