Are all disposable gloves produced in the same way?

 Of course, it is different. Not all gloves are produced the same way. In fact, we can judge from the appearance of the gloves whether the production methods are the same. Through comparison, we find that latex gloves, nitrile gloves, and PVC gloves are the same production method because the finger cots of these three gloves are relatively round Compared with PE gloves, the edges are not so sharp, so it can be judged that these three types are entered into the liquid material pool by hand, and finally air-dried. This is the magical production process that everyone knows, but PE gloves are not The same, the edge of the finger cot of PE gloves is as sharp as ordinary plastic gloves, like a piece of paper. Therefore, PE gloves are not produced by touching them by hand but directly processed from the entire piece of PE material.

Latex/nitrile Glove Making Machine Provided by YG

The natural latex glove production line adopts a continuous production method and direct immersion method, with uniform film formation, and can be used as medical-surgical gloves, examination gloves, and medical powdered and powder-free coated gloves. It can be molded automatically, the output is high, and the product has no sag.

1. Using the current advanced glove production technology layout and production technology, the product qualification rate is over 98%, and the protein content is less than 120 micrograms/g;
2. TPU coating technology.
3. Imported surface-active agent coagulant, film formation is more uniform, and powder-free demoulding.
4. The introduction of foreign advanced transmission main chain structure, the chain running resistance is small, and the production runs smoothly at high speed;
5. The main motor is dragged, which solves the problems of multiple dragging, difficult synchronization, multiple failure points, and difficult maintenance;
6. The vertical hot air circulation is adopted in the drying oven, which saves energy consumption by nearly 20% compared with other forms of hot air circulation.
7. Six-roller long-hair brushing technology for mold finger cleaning;
8. Multiple specifications are produced on the same machine, curling is automatically adjusted, PU curling roller, long service life;
9. Models with different lengths, heights, and costs can be designed according to customer needs.
   
   
   

Advantages of latex/nitrile gloves

1. 100% pure primary color latex, good elasticity, comfortable to wear.
2. Comfortable to wear, free of oxidants, silicone oil, fat, and salt.
3. High tensile strength, puncture resistance, and not easy to break.
4. It has excellent chemical resistance, resistance to certain pH, and certain organic solvents, such as acetone.
5. There are few chemical residues on the surface, low iron content, low particle content, suitable for a strict clean room environment.