Beam Bending Machine

I beam bending machine is a kind of mechanical equipment for bending steel beam. A beam bending machine is mainly used for arched rounding and angle bending of H steel, U steel, round steel, rail steel, and other section steels. So it is also called H beam bending machine, U beam bending machine, section bending machine. I beam bending machines are commonly used for supporting steel bending in various engineering constructions.


Features of CNC Beam Bending Machine:

I beam bender adopts digital display encoder programming, it can make the positioning of the hydraulic control system accurate. The bent steel can automatically form at one time, it has the advantages of high efficiency and convenient operation. Its main function is to properly bend and deform the workpiece without changing the internal stress of the steel. So that the steel beam has not only achieved the purpose of bending deformation but has not changed its mechanical properties. The CNC cold bending machine is simple in construction and easy to operate.

Main Structure:

CNC I beam bending machine consists of six parts: base, mechanical transmission, cold bending system, hydraulic system, electrical control system, and auxiliary system. The hydraulic motor of I-beam bending machine to drive the oil pump and start the hydraulic components. So that the active cylinder forward to achieve the required radius. Then the double motor drives the reducer to pull the steel beam advance. The forward and backward movement of the active cylinder can adjust the required radius, the repeated operation can achieve the desired arc.

Working Principle:

During work, push the section steel for cold bending between the two driving rollers by the portal bracket of the auxiliary system. And then start a hydraulic system, the hydraulic cylinder pushes the dovetail groove and cold-roller to bend the I beam. When the desired arc reaches, close the hydraulic system, and open the mechanical transmission system. At this time, the active roller starts to rotate and drives the profile steel to move forward slowly and smoothly through friction. Thereby, it can achieve continuous cold bending operations.

How to Guarantee the Bending Quality of I-Beam?

CNC beam bending machine can guarantee the bending quality of steel beam, we summarize the following points.

  1. Make sure that the calculation of the neutral layer in the deformation zone is accurate, and maintain good symmetry of roller processing.
  2. The non-deformation area of the I-beam bending machine is no pressure (such as the bottom of the slide rail). The gap between the upper and lower rollers must be consistent.
  3. Before feeding the material, set the boot ramp according to the rolling state of the front channel. Before stable compression, the material can slide smoothly in the roller.
  4. The accuracy of the roller machining is the key. For this purpose, a special tool is specially made under the projector, so as to magnify 20 times for detection.
  5. The main drive of the I-beam cold bending machine adopts roller cone bearings. It can ensure that the spindle's radial runout is within 0.04mm. So that the I-beam cold-bending machine spindle will not move left and right.

Safety Operation of I-beam Bending Machine

  1. Strictly abide by the safety operation regulations, and wear protective equipment according to regulations.
  2. Clean and wipe the upper and lower molds before starting.
  3. Check if there is any foreign matter on the material holding rack, material blocking rack, and slider. If there is any foreign matter, clean it up.
  4. According to the thickness of the steel beam, choose an appropriate die mouth. The size of the die mouth is generally equal to or greater than 8 times the steel thickness.
  5. Figure out the bending force of the workpiece according to the calculation formula. The bending force of the workpiece must not be greater than 1000KN.
  6. When bending the I beam, the working pressure of the system should be appropriately reduced to avoid damaging the mold.
  7. When adjusting the stroke of the slider, make sure that the adjustment is less than 100, so as not to damage the machine.

Beam Bending Machine Manufacturer - YG Machinery

YG I beam bending machine is new equipment for processing and supporting steel arch frames. The steel beam can form automatically at one time, the bending machine has the advantages of accurate and fast operation, smooth arc, small distortion. It is widely used in construction sites, such as construction, railway construction, highway construction, bridge construction, and large factory buildings. The CNC steel bending machine can process various types of steel. Therefore, the YG beam bending machine will be necessary equipment for each construction site.

Comments

Post a Comment

Popular posts from this blog

Classification of glove making machines?

Image
  There are many types of gloves on the market such as labor protection gloves, knitted gloves, latex gloves and disposable film gloves. Gloves of different materials have different uses. Because there are many types of gloves and gloves made of different materials are different, various glove making machines have also emerged. The latex glove mking machine , as the name suggests, produces latex gloves. Latex gloves are a kind of gloves. It is different from ordinary gloves made of latex. It can be used as a necessary hand protection for household, industry, medical, beauty and other industries. Latex gloves made of natural latex and other fine additives are processed with special surface treatment and comfortable to wear. They are widely used in industrial and agricultural production, medical treatment, and daily life. Contact us to get latex glove mking machine price right now. The cotton gloves produced by glove knitting machines are also a kind of labor protection gloves. Fu...
Read more

Flat-type automatic blister packaging machine | YG Machinery

Image
Flat-type automatic blister packaging machine is suitable for aluminum-plastic, paper-plastic, aluminum-aluminum composite sealed packaging of capsules, tablets, honeyed pills, candies and special-shaped objects in pharmaceutical, food, electronics, medical equipment and other industries. The machine adopts microcomputer programmable controller, touch panel operation, frequency conversion speed regulation, high degree of automation, easy operation, and is currently the most ideal blister packaging equipment. Since the establishment of our company, we have specialized in the production of DPB automatic aluminum-plastic packaging machine series, which have been improved and perfected with reference to foreign advanced technology, and can completely replace imported equipment. The implementation of aluminum-plastic composite sealed packaging has the advantages of extending the shelf life, beautifying the product, and reducing packaging costs. Due to its small footprint, low investment, mu...
Read more