How to Operate the Steel Tube Straightening Machine Correctly

1. The diameter of steel pipe should be within the adjustable range of the machine. If it is larger than the range, which will damage the machine or steel pipe.
2. These steel tube should be treated before straightening, such as severe deformation, butt or flatten, and weld on the surface.
3. When the steel pipe enters the machine, worker should grasp steel pipe more than 1 meter away from the head. After the steel pipe entering automatically, release your hand as soon as possible. When the steel pipe will be out of the machine, you had better hold the front end of the steel pipe and push a new one.
4. If the machine does not rotate or steel tube does not advance during the work, stop immediately, and press the “reverse” button and withdraw the steel pipe. Or stop the machine running, find out the cause, and remove the fault before continuing work.
5. This machine has grounding protection bolts. Install it according to local requirements to prevent electric shock and injury.

The steel tube has wide range of applications.

Steel pipes are not only used to transport fluids and powdered solids, exchange heat, make mechanical parts and containers, but also an economical steel. Since steel pipe is hollow, building structure grids, pillars and mechanical supports made of steel pipes can reduce weight and save metal by 20~40%. The application of steel pipes in manufacture highway bridges, not only saves steel and simplifies construction, but also greatly reduces the area of the protective coating, saves investment and maintenance costs.

The steel pipe stored for a long time in the open air will rust on the surface. If it is not treated, which will affect the locking degree of the fastener and cause slippage, let alone the disassembled shelf tube. The scrap steel pipe has not been repaired, which will affect the support force and anti-torque force of the steel pipe, resulting in safety hazards. Nowadays, the labor cost is very high, and the steel pipe straightening deruster machine becomes the most ideal repairing tool, which is economical and quick. If the steel tube has been bent and deformed, repair it in the simplest way – straightening quickly by steel pipe straightening machine.

YG steel tube straightening machine can straighten curved steel pipes, and also have the functions of rust removing and painting. Straighten small or hard bend at one time, then remove the rust and ash by the steel brush. Finally, brush paint on the steel pipe evenly. The whole process will not cause damage to the steel pipe. Several functions can be used separately or simultaneously, and the operation is relatively simple.