How to Maintain the Cold Paint Road Marking Machine

  1. The sprayer should be cleaned immediately after finishing the spraying operation, which can remove any residual paint and prevent it becoming hard. It need to change the paint into the corresponding solvent, operate the machine until all paint in the machine is sprayed.
  2. It is necessary to clean the filter of the spray gun after the spraying machine is used for a period of time. If the filter element is found to be damaged, the new filter element should be replaced.
  3. If spraying is not smooth during the spraying process, check and clean the aspiration filter in time.
  4. Periodically check if the fasteners are loose and if the seals are leaking.
  5. Clean the oil inlet filterregularly to prevent foreign body plungers from causing abnormal wear of the plunger.
  6. Under normal conditions, it is necessary to check whether the hydraulic oil is clean and missingafter spraying for 400hours. If hydraulic oil is clean but missing, add it; if the hydraulic oil is not clean, replace it. To replace the hydraulic oil, it is need to clean the oil chamber of the pump body with kerosene first, and then fill up the hydraulic oil.
 Cold Spray Road Line Marking Machine

Comments

Popular posts from this blog

What is an Oxygen Concentrator Machine Used for?

Mini roller compactor failure causes and repair solutions