PP Woven Bag Making Machine | Leno bag making machine

Comments

Post a Comment

Popular posts from this blog

What are the Characteristics of the Dust Suppression Fog Cannon Machine?

Image
  Fog cannon dust suppression uses the principle that dust can be agglomerated and increased by bonding with water, allowing fine dust to pass through the interaction of equal diameter water droplets, reducing the tension on the water surface, and making dust particles agglomerate with water mist. , Under the action of gravity, it finally settles to the ground. When the size of the fog particles is close to that of the dust particles, the dust reduction effect is best. The fog cannon machine can spray water mist 120 meters away and 70 meters high. Compared with ordinary sprinklers, the water mist particles sprayed by the dust suppression cannon are extremely small. In haze weather, it can spray dust, decompose and desalinate the particle concentration in the air. , The polluting particles floating in the air are quickly forced down to the ground to achieve the effect of cleaning and purifying the air. Let's start with the working principle of dust suppression cannon , using a high...
Read more

How to Maintain the Cold Paint Road Marking Machine

Image
The sprayer should be cleaned immediately after finishing the spraying operation, which can remove any residual paint and prevent it becoming hard. It need to change the paint into the corresponding solvent, operate the machine until all paint in the machine is sprayed. It is necessary to clean the filter of the spray gun after the  spraying machine  is used for a period of time. If the filter element is found to be damaged, the new filter element should be replaced. If spraying is not smooth during the spraying process, check and clean the aspiration filter in time. Periodically check if the fasteners are loose and if the seals are leaking. Clean the oil inlet filterregularly to prevent foreign body plungers from causing abnormal wear of the plunger. Under normal conditions, it is necessary to check whether the hydraulic oil is clean and missingafter spraying for 400hours. If hydraulic oil is clean but missing, add it; if the hydraulic oil is not clean, replace it. To r...
Read more

Why is the price difference of shot blasting machine so big?

Image
  The shot blasting machine can be used to remove burrs, diaphragms and rust that may affect the integrity, appearance or clarity of the object. The shot blasting machine can also remove surface contaminants from the partially coated surface and provide a surface profile that increases the adhesion of the coating, thereby achieving the purpose of strengthening the workpiece. The difference between the shot blasting machine and the shot blasting derusting machine is that the shot blasting machine can reduce the fatigue life of the parts, increase different surface stresses, increase the strength of the parts or prevent fretting. Shot blasting machines are mainly used to process the surface of steel products in large quantities in the steel production process. The shot blaster machine can effectively remove burrs and large-scale corrosion on the steel surface. When using the shot blaster, if you do not master this technology, it is likely to damage the integrity of the steel surfa...
Read more