How to use a hydraulic rock splitter? What kind of project?

 Hydraulic rock splitter is a kind of equipment that uses the common physical tip splitting principle and hydraulic transmission principle to convert axial hydraulic thrust into lateral splitting force. The rock splitter machine is a safe, efficient, easy-to-operate, and low-cost secondary disassembly equipment.

Advantages of rock splitter machine:

1. Safety: Rock splitting equipment applies the physical characteristics of hydraulic oil that are not compressible and movable, and adds static thrust to complete the task of static controllability. Therefore, there is no need to take complex safety measures, and there will be no hidden risks like blasting and other impact demolition and rock drilling equipment.

2. Environmental protection: When the green environmental protection demolition expert-hydraulic rock splitter starts the construction task, there will be no vibration, impact, noise, dust flying, etc., and the surrounding environment will not be affected. Even in densely populated places or indoors, in urban construction, and close to tight equipment, construction tasks can be carried out without interference.

3. Economical: hydraulic concrete splitter machine has a large splitting force (rock splitting force can reach 600T), so a task only takes a few seconds, and can continue non-continuous tasks, with high efficiency; its operation and maintenance costs are very low; There is no need to take isolation or other time-consuming and expensive safety construction measures like blasting operations.

4. Flexibility in application: The hydraulic rock splitter machine has a humanized design for use, with small volume, light weight, and compact structure. It ensures that its application method is complicated and easy to learn, and only requires one person to operate; it can be very convenient to stop the removal of splits indoors or in narrow venues; at the same time, it can also work underwater. The maintenance is convenient and quick, and the service life is long.

5. Intelligent sensitivity: Unlike most traditional dismantling methods and equipment, the hydraulic rock splitter machine can determine the splitting direction afterward, and can be dismantled and split according to the required split shape and the size of the part that needs to be taken out.

How to use hydraulic rock splitter:

1. Use a rock drill to drill a hole in the rock. The diameter of the hole depends on the outer diameter of the hydraulic concrete splitter machine wedge component, and the size of the wedge component depends on the size of the rock at the construction site. The volume of the rock is large, so the choice is large. Diameter wedge components can also be small-diameter porous and the rock volume is small, so small-diameter wedge components can be used. The drilling depth is generally 500mm. When drilling holes, pay attention to the orientation of the ore drilling hole should be perpendicular to the surface where the hole is located, the size of the hole should be consistent with the diameter of the rock splitter machine, and the depth of the hole should be 200-250mm deeper than the insertion length of the wedge component.

2. Insert the splitter into the manhole, and adjust the splitting direction appropriately according to requirements.

3. Start the pump station.

4. Control the reversing valve to extend the piston and start splitting. After the rock cracks a small fine line, the reversing valve reverses, the piston rod and the inner wedge retract, and the splitter is rotated to make it and Turn the direction of the initial crack at an angle, and then stop splitting again, so that one rock can be broken into multiple small rocks.