What is thermoplastic pavement markings?

 Road marking machines are widely used in roads, parking lots, squares and runways and other occasions. One of the common ones is to draw a zebra crossing on the road, draw a garage line, a parking line, etc. on the road to be used in small projects and short-distance construction, which is convenient for activities and flexible operation. The advantages of the hand-push thermoplastic marking machine are that it uses less equipment, has a long life span, and can be used for 3 to 5 years. It has good reflection effect at night, strong anti-pollution ability, long-term sharpness, good adhesion, and excellent wear resistance. Sex and durability. The construction of the thermoplastic road marking machine should be prepared in advance, and all necessary on-site safety facilities, tools for repairing markings and markings, gray bags for marking standard lines, and necessary drawing boards, fonts, etc. should be prepared.

The thermoplastic road marking machine is mainly set on the surface of the road. It is exposed to the sun, rain, wind, snow and freezing, and is subject to the impact and abrasion of vehicles. Therefore, it has strict requirements on its performance. First, it requires a short drying time and simple operation to reduce traffic interference; secondly, it requires strong reflection, bright colors, and strong reflectivity, so that it has good visibility during the day and night; third, it should have skid resistance and abrasion resistance. To ensure driving safety and service life. The thermoplastic road marking machine adopts special road special cold paint, which is manually sprayed with uniform thickness and clear color. Including parking spaces, no-stop yellow line areas, passage lines, diversion belts, guide arrows, etc.

Construction operation requirements of thermoplastic road marking machine:

1. The road surface should be clean and dry, and there should be no loose particles, dust, asphalt residue, oil stains or other harmful materials.

2. The road line marking machine should determine the position of the marking and the width and length of the marking according to the specific dimensions of the highway cross section and the requirements of the design documents, and use the lime elastic tool on the road to eject the actual marking position reference line on the road in advance.

3. Before the formal construction, a trial drawing should be carried out to check whether the road line marking machine's driving speed, line width, marking thickness, and reflective glass beads can meet the requirements. After the commissioning is qualified, the formal construction will begin.

4. During construction, drainage holes should flow out in accordance with the requirements of the design documents, and the protruding road signs at the no overtaking line should be vacant.

5. The defects in the construction should be repaired in time.

6. The construction of the formed marking tape and the non-slip color pavement marking shall comply with the requirements of the product instruction manual.

The general line width of hand-push thermoplastic marking machine is 15 cm. The hot-melt marking material is melted by the hot melt kettle, and the thermoplastic road marking machine is used. The hand-push thermoplastic marking machine is a machine used for hot-melt marking of highway pavements. The powdery hot-melt coating melted at a high temperature of 200° is applied to the road surface by means of scraping.