Mortar Spraying Machine Price - Cement Sprayer Machine

 The mortar spraying machine is special coating equipment that uses spraying technology. The principle is to control the airflow to instantly push the air distribution reversing device to reverse so that the piston of the air motor can make a stable and continuous reciprocating motion. Suitable for reinforcement, leveling, painting, and pumping. Cement mortar spraying machine can be used for ordinary mortar plastering, plastering plaster, thermal insulation mortar, bonding mortar, lime plastering, repairing plastering, surface plastering, bonding tiles, and filling mortar. You can use both ready-mixed and pre-mixed mortars at the same time. By changing the spray gun and screw pump, you can adjust the air volume and use most ordinary mortars and special mortars to achieve multiple functions in one machine, and use different materials with different mixers to achieve the integration of mixing and spraying.

What are the characteristics of a concrete mortar spraying machine?

1. The cement sprayer machine sprays latex paint to form a smooth, smooth, and dense coating on the wall without brush marks or rolling marks, which is unmatched by the original methods such as brushing and rolling.

2. (mortar spraying machine) coating efficiency is high. The spraying efficiency of a single operation is as high as square meters per hour, which is 10-15 times that of manual brushing.

3. Good adhesion and long coating life. The concrete mortar spraying machine uses high-pressure spray to make the atomized paint particles obtain strong kinetic energy; the paint particles use this kinetic energy to shoot into the pores to make the paint film denser, thereby enhancing the mechanical bite force between the paint film and the wall and improving the coating. Layer adhesion. Effectively extend the life of the coating.

4. The paint film thickness is uniform and the paint utilization rate is high. The thickness of the manual brush roller is extremely uneven, generally between 30-250 microns, and the paint utilization rate is low; while airless spraying can easily obtain a coating with a thickness of 30 microns.

5. Easy to reach corners and gaps. Due to the use of high-pressure airless spray, the paint spray does not contain air, and the paint easily reaches corners, gaps, and uneven areas that are difficult to brush. It is especially suitable for office ceilings with many air-conditioning and fire-fighting pipes, but rolling brushing is difficult to apply.

6. High-viscosity coatings can be sprayed, while hand brushing, air spraying, etc. are only suitable for low-viscosity coatings.