Mortar Sprayer Machine

Cement Plaster Spray Machine | Mortar Sprayer Machine

Comments

Post a Comment

Popular posts from this blog

What is the difference between injection molding machine and blow molding machine?

Image
Injection molding and blow molding are two distinct manufacturing processes used to produce plastic products, and the machines used for each process are different in design and function. Injection molding is a process in which molten plastic material is injected under high pressure into a mold cavity, where it cools and solidifies to form a plastic part. The injection molding machine has a hopper that feeds the plastic material into a heated barrel, where it is melted and then injected into a mold cavity by a reciprocating screw. Once the plastic has cooled and solidified, the mold is opened, and the finished part is ejected. Contact us to get the injection molding machine's price. WhatsApp/WeChat: +8613598866720 Blow molding , on the other hand, is a process in which a hollow plastic part is formed by inflating a molten plastic tube or preform inside a mold cavity. The blow molding machine has a hopper that feeds plastic material into a heated extruder, where it is melted and th...
Read more

How to do Road Waterproofing Project

Image
Waterproof technology is an extremely important step in road construction. If the waterproof construction of the road surface is not done well, it will directly affect the overall construction quality, and shorten the service life of the road. In the waterproof technology of pavement construction, first make the cracks clearer, and then take effective waterproof measures. Now, the application of  construction machinery  is wide, it can shorten time and save money. The efficiency and effect is better than manual. Construction Strategy of Road Waterproofing Project: Shot blasting machine  can clean the slurry and impurities of road, and make the road surface uniform and rough. The machine greatly improves the adhesion strength of the waterproof layer. And it can also expose the cracks of the concrete fully. It equips with dust collector, the construction process is dust-free and pollution-free. The concrete shot blasting machine is also can used to clean steel plate ...
Read more

How to Maintain the Fog Cannon

Image
When the operation and maintenance of fog cannon machine are improper, the machine is easily corroded, which will reduce its service life. Therefore, the fog cannon should be maintained in the following aspects. It is necessary to operate according to the instructions, check and adjust the status of each component. Add lubrication to the machine and keep it clean. After the end of the operation, it should be promptly rinsed and sprayed with water for several times. So as to clear the remaining liquid in the tank, pump and pipeline. If the fog cannon is stored for a long time, the machine and its components need to be cleaned, including V-belts, spray hoses, nozzles, mixers and suction pipes. Due to its working principle of dust source prevention, fog cannons have become one of the most effective products for urban dust management. They are widely used in building demolition, earthworks, municipal environmental protection, open pit coal mines, garbage landfill sites, docks ...
Read more