Hydraulic Pile Breaker-Cutting and Demolition Equipment

 Pile breaker is also called concrete pile breaker, hydraulic pile breaker can provide pressure to multiple cylinders at the same time. The oil cylinder drives drill rods distributed in different radial directions, just like a concrete solid column with a diameter of one or two meters that is started by multiple breaking hammers at the same time. It was cut off instantly, leaving only steel bars. The pile cutting machine can be connected with a variety of construction machinery. When the supporting force exceeds its tensile strength, the dismantled structure can be split from the inside, the thin steel bars can be pulled off at the same time, and the thick steel bars can be broken by gas cutting and other methods, finally achieving the purpose of demolition.

The hydraulic pile breaker is an economical, efficient and practical non-construction machine. It also has the advantages of small size, light weight, convenient operation, safe and reliable, flexible use, high work efficiency, no vibration, no impact, no noise, no Dust and splitting direction can be controlled, economical and practical.


Engineering application scope of pile breaker machine

Hydraulic pile breaking machine, breaking piles such as cast-in-place piles, precast piles, etc.; from the shape of the broken pile head, it can be divided into circular pile breaking machines and square pile machines. Pile breakers are widely used in high-speed railway bridges, industrial and civil construction pile foundation projects. Generally, round pile breakers are suitable for pile diameters between 600mm-2500mm; square pile breakers are suitable for pile side lengths of 350-800mm and can be used for various large foundations. Construction requirements.


Three conditions of hydraulic pile breaking machine breaking pile head

1. Determine the length of each pile cut according to the power of the excavator selected to prevent the excavator from being unable to transfer the waste residue after being broken due to insufficient lifting power of the excavator;

2. It is not advisable to use pre-bending on the top of the concrete pouring steel cage after the pile is formed. At the same time, it is necessary to install a PVC pipe on the pile top steel bar to prevent the pile body from being cut after the concrete and steel are solidified after the pouring.

3. After the pile head is mechanically cut off, the section needs to be simply treated.


What are the characteristics of the pile breaker?

The hydraulic pile breaker features simple pile operation, does not require skills, and the operation is quite safe and block-sized. Through the combination of different numbers of modules, the pile heads of different sizes and diameters can be cut off. The pile breaker can be connected with a variety of construction machinery and can be hung on the excavator. For cranes, telescopic booms and other construction machinery, the price ratio is high. They are made of high-quality steel and have a longer service life. They can bring customers good benefits, guaranteed performance, low noise operation, and will not affect the surrounding environment during construction. Full hydraulic drive, no Vibration, hydrostatic radial construction.

Comments

Post a Comment

Popular posts from this blog

What is the difference between a shot blasting machine and sand blasting machine?

Image
  Shot blasting machine is generally used for regular shapes, etc., several blasting heads are up and down, left and right, high efficiency and low pollution. In the shipbuilding industry, shot blasting and sand blasting machines are commonly used. However, both the shot blasting machine and the sand blasting machine uses compressed air. Of course, it is not the floor shot blasting machine that has to use a high-speed rotating impeller. In shipbuilding and shipbuilding industries, floor shot blasters are generally used for steel plate pretreatment (removal of rust before painting); shot blasting equipment (ores used in repairing and shipbuilding industries) are mostly used for shaped ships or sub-parts. The function is to remove the old paint and rust on the steel plate and repaint it. In the shipbuilding and shipbuilding industry, the main function of shot blasting equipment and automatic sandblasting machine is to increase the adhesion of steel plate coating paint. In fact, t...
Read more

What are the classifications of drilling rigs?

Image
  water well drilling rigs Water well drilling rigs are easy to move, small in size, and high in work efficiency. They are fully hydraulically controlled for lifting, outriggers, lifting, and other processes. Drill pipes can be replaced without stopping the machine. It can meet various geological conditions such as soil, well-drilling sand, and rock pebble layers. Structure, equipped with high-power hydraulic motor, high torque, fast drilling speed. Water well drilling machine is suitable for complex formations such as soil layer, rock layer, pebble layer, cemented pebble layer, etc. Water well drilling rigs are widely used in foundation engineering construction of high-rise buildings, large bridge projects, water conservancy construction, farmland engineering, and other fields. Small water well drilling rigs are suitable for building pile foundations, high-tension line tower pile foundations, dam foundation drilling, drilling water wells, agricultural irrigation wells, and engin...
Read more

How are nitrile gloves produced?

Image
Nitrile gloves are mainly made by dipping nitrile latex, molding, vulcanizing, surface treatment, dust-free cleaning, and other processes. The specific production process is as follows: First of all, the material for making nitrile gloves is nitrile rubber, which is formed by the emulsion polymerization of butadiene and acrylonitrile. Then, the hand-washing mold: the hand-washing mold needs to be pickled first, washed first, alkali washed, and then washed. After washing the hand mold, it should be dried or dried before entering the next process. The third step is to impregnate the nitrile latex to shape the glove. That is, the hand mold is immersed in a container filled with nitrile, heated at a high temperature, and dried after forming the glove. Next, we need to prepare the gloves to curl to facilitate putting on and taking off the gloves. After the above steps, the nitrile glove has been formed, but it has not been successful. A key step is needed: chlorine washing. Chlorine cleani...
Read more