Atomizing Disinfection Door

Disinfecion Door for Sale | Intelligent Disinfection Door

Comments

Post a Comment

Popular posts from this blog

How to Maintain the Cold Paint Road Marking Machine

Image
The sprayer should be cleaned immediately after finishing the spraying operation, which can remove any residual paint and prevent it becoming hard. It need to change the paint into the corresponding solvent, operate the machine until all paint in the machine is sprayed. It is necessary to clean the filter of the spray gun after the  spraying machine  is used for a period of time. If the filter element is found to be damaged, the new filter element should be replaced. If spraying is not smooth during the spraying process, check and clean the aspiration filter in time. Periodically check if the fasteners are loose and if the seals are leaking. Clean the oil inlet filterregularly to prevent foreign body plungers from causing abnormal wear of the plunger. Under normal conditions, it is necessary to check whether the hydraulic oil is clean and missingafter spraying for 400hours. If hydraulic oil is clean but missing, add it; if the hydraulic oil is not clean, replace it. To r...
Read more

How to do Road Waterproofing Project

Image
Waterproof technology is an extremely important step in road construction. If the waterproof construction of the road surface is not done well, it will directly affect the overall construction quality, and shorten the service life of the road. In the waterproof technology of pavement construction, first make the cracks clearer, and then take effective waterproof measures. Now, the application of  construction machinery  is wide, it can shorten time and save money. The efficiency and effect is better than manual. Construction Strategy of Road Waterproofing Project: Shot blasting machine  can clean the slurry and impurities of road, and make the road surface uniform and rough. The machine greatly improves the adhesion strength of the waterproof layer. And it can also expose the cracks of the concrete fully. It equips with dust collector, the construction process is dust-free and pollution-free. The concrete shot blasting machine is also can used to clean steel plate ...
Read more

What are the Advantages of Asphalt Crack Filler Machine?

Image
The small asphalt crack filler machine has advanced technology, convenient operation, high engineering quality, and reasonably shortens the construction time, effectively alleviating the maintenance pressure of the road maintenance department. The asphalt crack filler machine is the core equipment of joint filling technology. After the cracks are grooved and cleaned, the cracks are heated, and the sealant is evenly poured into the grooves with a filling gun to complete the joint repair work. When the small asphalt crack sealer machine is working, it is generally used in conjunction with a slotting machine and a blower. Advantages of Asphalt Crack Sealer Machine 1.  Strong kinetic energy. Imported generator sets and motor pumps can provide sufficient power for the slotting operation of the asphalt filling machine; 2.  A good hand pushes flexibility. Small size, lightweight, independent power, easy to operate, light and practical, easy to move, uniform filling and high effici...
Read more