How to Choose a High-quality Fog Sprayer Machine?

The fog sprayer machine uses water as a carrier directly when working, and does not require any other auxiliary agents to achieve a diffuse effect. The drug has strong adhesion, and the sterilization, disinfection, and deworming effects are very good. It has excellent penetrability and diffusion and is resistant to rain erosion. It can be sprayed at any angle without leaving a dead angle. It has high working efficiency and is conducive to environmental protection and other outstanding features. It is a multifunctional machine integrating disinfection, sterilization, and pesticide spraying. We YG Machinery has a variety of fog sprayer machine, if you have any needs, you can contact me, will give you a detailed introduction.

What are the Characteristics of the Fog Sprayer Machine?

1. High working efficiency, long-range, strong penetrating power, and high safety factor.

2. Work in all directions without flameout, stable, and reliable working performance.

3. High efficiency, saving medicine, low cost, good diffusion, and strong adhesion.

4. Lightweight, flexible and convenient operation.

5. It can be sprayed with smoke or water spray, and it can be used for two purposes.

What are the Uses of Fog Sprayer Machine?

1. Urban sanitation and epidemic prevention and sanitation and transportation: used in hotels, property communities, warehouses, schools, stations, airports, and other disinfection and sterilization.

2. Provincial medicine and low environmental pollution: due to the small particle size of the medicine, the effect of the medicine is fully exerted, which greatly reduces the pesticide input and the water consumption, so it is suitable for use in water-scarce areas such as mountain areas and plateaus.

3. The long-lasting effect, increase temperature. 0.5-10 micron particles, floating in the air for a long time, when the temperature of dapeng is too low in winter, this machine can be used as a machine to increase the temperature.

4. High range: the flat spray area covers a large area, the spray mist can reach more than 50 meters, and the liquid medicine particles are small, the penetration is strong, suitable for high rods and dense plants such as forests, corn, cotton, and other open crops.

How to Maintain the Fog Sprayer Machine?

1. Check the gas pipeline for cracks and leaks, check whether there are impurities in the check valve, if the air is returned, clean, or replace the check valve.

2. Check whether the carburetor module is damaged, and replace it if it is damaged.

3. Check whether there is too much carbon accumulation inside and outside the spray pipe or the protective pipe, clean it with the cleaning rod, and check whether the medicine barrel lid is closed.

4. Check if the medicine path is blocked, and clean it in time, use an iron bar to clean the spray tube.

5. Check if there is any impurity in the airway check valve leading to the medicine barrel. If the two-way ventilation should be replaced in time, install a new one before use.